AXIS has become a part of EMC2

AXIS: EMC2 Blog

Blog
About AXIS
Get EMC2
Documentation
Translations
ETCH CNC

Developer Homepages:
Chris Radek
Jeff Epler

Related sites:
linuxcnc.org
linuxcnc wiki

« Writing HAL components with AXIS's 'hal' module: Feed Override Wheel | Newest entries | Image-to-gcode in CVS »

AXIS, the graphical front-end with preview and backplot, is now a part of EMC2.

The CVS server at axis.unpy.net has been retired, and the old axis repository has been moved to 'axis-historical' on cvs.linuxcnc.org. New development of AXIS will take place in the 'emc2' module, also on cvs.linuxcnc.org.

If you were already building AXIS inside the emc source tree, you will have to issue these commands from the top directory before doing a 'cvs up':

    rm -r share lib/python

then, update (cvs up -Pd) and re-run configure. If you have all the prerequisites, configure prints 'Will build AXIS' near the end.

Note that 'make install' will not currently copy the AXIS files to the install directory. Please use "--enable-run-in-place" for now. Please feel free to report problems or successes on the emc-users or emc-developers list.

Historical releases of AXIS are still available.
-- Jeff

Entry first conceived on 10 August 2006, 1:51 UTC, last modified on 10 August 2006, 13:08 UTC

[æ]